The following options control the architecture variant for which code is being compiled:
-mbarrel-shifter ¶Generate instructions supported by barrel shifter. This is the default unless -mcpu=ARC601 or ‘-mcpu=ARCEM’ is in effect.
-mcpu=cpu ¶Set architecture type, register usage, and instruction scheduling parameters for cpu. There are also shortcut alias options available for backward compatibility and convenience. Supported values for cpu are
Compile for ARC600. Aliases: -mA6, -mARC600.
Compile for ARC601. Alias: -mARC601.
Compile for ARC700. Aliases: -mA7, -mARC700. This is the default when configured with --with-cpu=arc700.
Compile for ARC EM.
Compile for ARC HS.
-mdpfp ¶-mdpfp-compactFPX: Generate Double Precision FPX instructions, tuned for the compact implementation.
-mdpfp-fast ¶FPX: Generate Double Precision FPX instructions, tuned for the fast implementation.
-mno-dpfp-lrsr ¶Disable LR and SR instructions from using FPX extension aux registers.
-mea ¶Generate Extended arithmetic instructions. Currently only
divaw, adds, subs, and sat16 are
supported. This is always enabled for -mcpu=ARC700.
-mno-mpy ¶Do not generate mpy instructions for ARC700.
-mmul32x16 ¶Generate 32x16 bit multiply and mac instructions.
-mmul64 ¶Generate mul64 and mulu64 instructions. Only valid for -mcpu=ARC600.
-mnorm ¶Generate norm instruction. This is the default if -mcpu=ARC700 is in effect.
-mspfp ¶-mspfp-compactFPX: Generate Single Precision FPX instructions, tuned for the compact implementation.
-mspfp-fast ¶FPX: Generate Single Precision FPX instructions, tuned for the fast implementation.
-msimd ¶Enable generation of ARC SIMD instructions via target-specific builtins. Only valid for -mcpu=ARC700.
-msoft-float ¶This option ignored; it is provided for compatibility purposes only. Software floating point code is emitted by default, and this default can overridden by FPX options; ‘mspfp’, ‘mspfp-compact’, or ‘mspfp-fast’ for single precision, and ‘mdpfp’, ‘mdpfp-compact’, or ‘mdpfp-fast’ for double precision.
-mswap ¶Generate swap instructions.
-matomic ¶This enables Locked Load/Store Conditional extension to implement atomic memopry built-in functions. Not available for ARC 6xx or ARC EM cores.
-mdiv-rem ¶Enable DIV/REM instructions for ARCv2 cores.
-mcode-density ¶Enable code density instructions for ARC EM, default on for ARC HS.
-mll64 ¶Enable double load/store operations for ARC HS cores.
-mmpy-option=multo ¶Compile ARCv2 code with a multiplier design option. ‘wlh1’ is the default value. The recognized values for multo are:
No multiplier available.
The multiply option is set to w: 16x16 multiplier, fully pipelined. The following instructions are enabled: MPYW, and MPYUW.
The multiply option is set to wlh1: 32x32 multiplier, fully pipelined (1 stage). The following instructions are additionally enabled: MPY, MPYU, MPYM, MPYMU, and MPY_S.
The multiply option is set to wlh2: 32x32 multiplier, fully pipelined (2 stages). The following instructions are additionally enabled: MPY, MPYU, MPYM, MPYMU, and MPY_S.
The multiply option is set to wlh3: Two 16x16 multiplier, blocking, sequential. The following instructions are additionally enabled: MPY, MPYU, MPYM, MPYMU, and MPY_S.
The multiply option is set to wlh4: One 16x16 multiplier, blocking, sequential. The following instructions are additionally enabled: MPY, MPYU, MPYM, MPYMU, and MPY_S.
The multiply option is set to wlh5: One 32x4 multiplier, blocking, sequential. The following instructions are additionally enabled: MPY, MPYU, MPYM, MPYMU, and MPY_S.
This option is only available for ARCv2 cores.
-mfpu=fpu ¶Enables specific floating-point hardware extension for ARCv2 core. Supported values for fpu are:
Enables support for single precision floating point hardware extensions.
Enables support for double precision floating point hardware extensions. The single precision floating point extension is also enabled. Not available for ARC EM.
Enables support for double precision floating point hardware extensions using double precision assist instructions. The single precision floating point extension is also enabled. This option is only available for ARC EM.
Enables support for double precision floating point hardware extensions using double precision assist instructions, and simple precision square-root and divide hardware extensions. The single precision floating point extension is also enabled. This option is only available for ARC EM.
Enables support for double precision floating point hardware extensions using double precision assist instructions, and simple precision fused multiple and add hardware extension. The single precision floating point extension is also enabled. This option is only available for ARC EM.
Enables support for double precision floating point hardware extensions using double precision assist instructions, and all simple precision hardware extensions. The single precision floating point extension is also enabled. This option is only available for ARC EM.
Enables support for single precision floating point, and single precision square-root and divide hardware extensions.
Enables support for double precision floating point, and double precision square-root and divide hardware extensions. This option includes option ‘fpus_div’. Not available for ARC EM.
Enables support for single precision floating point, and single precision fused multiple and add hardware extensions.
Enables support for double precision floating point, and double precision fused multiple and add hardware extensions. This option includes option ‘fpus_fma’. Not available for ARC EM.
Enables support for all single precision floating point hardware extensions.
Enables support for all single and double precision floating point hardware extensions. Not available for ARC EM.
The following options are passed through to the assembler, and also define preprocessor macro symbols.
-mdsp-packa ¶Passed down to the assembler to enable the DSP Pack A extensions.
Also sets the preprocessor symbol __Xdsp_packa.
-mdvbf ¶Passed down to the assembler to enable the dual viterbi butterfly
extension. Also sets the preprocessor symbol __Xdvbf.
-mlock ¶Passed down to the assembler to enable the Locked Load/Store
Conditional extension. Also sets the preprocessor symbol
__Xlock.
-mmac-d16 ¶Passed down to the assembler. Also sets the preprocessor symbol
__Xxmac_d16.
-mmac-24 ¶Passed down to the assembler. Also sets the preprocessor symbol
__Xxmac_24.
-mrtsc ¶Passed down to the assembler to enable the 64-bit Time-Stamp Counter
extension instruction. Also sets the preprocessor symbol
__Xrtsc.
-mswape ¶Passed down to the assembler to enable the swap byte ordering
extension instruction. Also sets the preprocessor symbol
__Xswape.
-mtelephony ¶Passed down to the assembler to enable dual and single operand
instructions for telephony. Also sets the preprocessor symbol
__Xtelephony.
-mxy ¶Passed down to the assembler to enable the XY Memory extension. Also
sets the preprocessor symbol __Xxy.
The following options control how the assembly code is annotated:
-misize ¶Annotate assembler instructions with estimated addresses.
-mannotate-align ¶Explain what alignment considerations lead to the decision to make an instruction short or long.
The following options are passed through to the linker:
-marclinux ¶Passed through to the linker, to specify use of the arclinux emulation.
This option is enabled by default in tool chains built for
arc-linux-uclibc and arceb-linux-uclibc targets
when profiling is not requested.
-marclinux_prof ¶Passed through to the linker, to specify use of the
arclinux_prof emulation. This option is enabled by default in
tool chains built for arc-linux-uclibc and
arceb-linux-uclibc targets when profiling is requested.
The following options control the semantics of generated code:
-mlong-calls ¶Generate call insns as register indirect calls, thus providing access to the full 32-bit address range.
-mmedium-calls ¶Don’t use less than 25 bit addressing range for calls, which is the
offset available for an unconditional branch-and-link
instruction. Conditional execution of function calls is suppressed, to
allow use of the 25-bit range, rather than the 21-bit range with
conditional branch-and-link. This is the default for tool chains built
for arc-linux-uclibc and arceb-linux-uclibc targets.
-mno-sdata ¶Do not generate sdata references. This is the default for tool chains
built for arc-linux-uclibc and arceb-linux-uclibc
targets.
-mucb-mcount ¶Instrument with mcount calls as used in UCB code. I.e. do the counting in the callee, not the caller. By default ARC instrumentation counts in the caller.
-mvolatile-cache ¶Use ordinarily cached memory accesses for volatile references. This is the default.
-mno-volatile-cache ¶Enable cache bypass for volatile references.
The following options fine tune code generation:
-malign-call ¶Do alignment optimizations for call instructions.
-mauto-modify-reg ¶Enable the use of pre/post modify with register displacement.
-mbbit-peephole ¶Enable bbit peephole2.
-mno-brcc ¶This option disables a target-specific pass in arc_reorg to
generate BRcc instructions. It has no effect on BRcc
generation driven by the combiner pass.
-mcase-vector-pcrel ¶Use pc-relative switch case tables - this enables case table shortening. This is the default for -Os.
-mcompact-casesi ¶Enable compact casesi pattern. This is the default for -Os.
-mno-cond-exec ¶Disable ARCompact specific pass to generate conditional execution instructions. Due to delay slot scheduling and interactions between operand numbers, literal sizes, instruction lengths, and the support for conditional execution, the target-independent pass to generate conditional execution is often lacking, so the ARC port has kept a special pass around that tries to find more conditional execution generating opportunities after register allocation, branch shortening, and delay slot scheduling have been done. This pass generally, but not always, improves performance and code size, at the cost of extra compilation time, which is why there is an option to switch it off. If you have a problem with call instructions exceeding their allowable offset range because they are conditionalized, you should consider using -mmedium-calls instead.
-mearly-cbranchsi ¶Enable pre-reload use of the cbranchsi pattern.
-mexpand-adddi ¶Expand adddi3 and subdi3 at rtl generation time into
add.f, adc etc.
-mindexed-loads ¶Enable the use of indexed loads. This can be problematic because some optimizers then assume that indexed stores exist, which is not the case.
Enable Local Register Allocation. This is still experimental for ARC, so by default the compiler uses standard reload (i.e. -mno-lra).
-mlra-priority-none ¶Don’t indicate any priority for target registers.
-mlra-priority-compact ¶Indicate target register priority for r0..r3 / r12..r15.
-mlra-priority-noncompact ¶Reduce target register priority for r0..r3 / r12..r15.
-mno-millicode ¶When optimizing for size (using -Os), prologues and epilogues that have to save or restore a large number of registers are often shortened by using call to a special function in libgcc; this is referred to as a millicode call. As these calls can pose performance issues, and/or cause linking issues when linking in a nonstandard way, this option is provided to turn off millicode call generation.
-mmixed-code ¶Tweak register allocation to help 16-bit instruction generation. This generally has the effect of decreasing the average instruction size while increasing the instruction count.
-mq-class ¶Enable ’q’ instruction alternatives. This is the default for -Os.
-mRcq ¶Enable Rcq constraint handling - most short code generation depends on this. This is the default.
-mRcw ¶Enable Rcw constraint handling - ccfsm condexec mostly depends on this. This is the default.
-msize-level=level ¶Fine-tune size optimization with regards to instruction lengths and alignment. The recognized values for level are:
No size optimization. This level is deprecated and treated like ‘1’.
Short instructions are used opportunistically.
In addition, alignment of loops and of code after barriers are dropped.
In addition, optional data alignment is dropped, and the option Os is enabled.
This defaults to ‘3’ when -Os is in effect. Otherwise, the behavior when this is not set is equivalent to level ‘1’.
-mtune=cpu ¶Set instruction scheduling parameters for cpu, overriding any implied by -mcpu=.
Supported values for cpu are
Tune for ARC600 cpu.
Tune for ARC601 cpu.
Tune for ARC700 cpu with standard multiplier block.
Tune for ARC700 cpu with XMAC block.
Tune for ARC725D cpu.
Tune for ARC750D cpu.
-mmultcost=num ¶Cost to assume for a multiply instruction, with ‘4’ being equal to a normal instruction.
-munalign-prob-threshold=probability ¶Set probability threshold for unaligning branches. When tuning for ‘ARC700’ and optimizing for speed, branches without filled delay slot are preferably emitted unaligned and long, unless profiling indicates that the probability for the branch to be taken is below probability. See Data File Relocation to Support Cross-Profiling. The default is (REG_BR_PROB_BASE/2), i.e. 5000.
The following options are maintained for backward compatibility, but are now deprecated and will be removed in a future release:
-margonaut ¶Obsolete FPX.
-mbig-endian ¶-EBCompile code for big endian targets. Use of these options is now
deprecated. Users wanting big-endian code, should use the
arceb-elf32 and arceb-linux-uclibc targets when
building the tool chain, for which big-endian is the default.
-mlittle-endian ¶-ELCompile code for little endian targets. Use of these options is now
deprecated. Users wanting little-endian code should use the
arc-elf32 and arc-linux-uclibc targets when
building the tool chain, for which little-endian is the default.
-mbarrel_shifter ¶Replaced by -mbarrel-shifter.
-mdpfp_compact ¶Replaced by -mdpfp-compact.
-mdpfp_fast ¶Replaced by -mdpfp-fast.
-mdsp_packa ¶Replaced by -mdsp-packa.
-mEA ¶Replaced by -mea.
-mmac_24 ¶Replaced by -mmac-24.
-mmac_d16 ¶Replaced by -mmac-d16.
-mspfp_compact ¶Replaced by -mspfp-compact.
-mspfp_fast ¶Replaced by -mspfp-fast.
-mtune=cpu ¶Values ‘arc600’, ‘arc601’, ‘arc700’ and ‘arc700-xmac’ for cpu are replaced by ‘ARC600’, ‘ARC601’, ‘ARC700’ and ‘ARC700-xmac’ respectively
-multcost=num ¶Replaced by -mmultcost.